亚洲五月六月丁香缴情

  • <blockquote id="augau"></blockquote>
  • Your current location: Home > News >

    Castable Refractory

    Aug 20, 2018

    Castable Refractory

     

    High aluminum castable: It is a kind of castable with a cement content of less than 8%. Unlike ordinary refractory castables, most of the calcium aluminate cement in the matrix is replaced by ultra-fine powder (Ecken), and with the addition of appropriate additives to achieve and exceed the performance of ordinary cement castables.

     

     The main features of aluminum castables are as follows:
    1. The low content of cement in the castable, that is, the low content of calcium oxide, reduces the generation of low-melts in the material, thereby improving the refractoriness, high-temperature strength and slag resistance of the product.
    2. The mixing water consumption of the castable is only about one-half of that of the ordinary castable, thus increasing the compactness of the castable and reducing the porosity.
    3. After forming and curing, the generated cement hydrate is less. When heating and baking, there is no large amount of water leakage, which reduces the medium temperature strength. However, as the temperature increases, the material gradually sinters and the strength is continuously improved.

    Refractory Castable Technical Date:

    technical data

     

     
    Application
    Castable Refractory
    Refractory castables are mainly used in the metallurgical industry furnace, also in the petroleum, chemical, building materials, power and machinery industry furnace and thermal equipment.
    We could offer you the best refractory castable as following:
    1.High alumina castable.
    2.low cement refractory castable.
    3.corundum castable.
    4.Self flowing refractory castable.
    5.Corundum mullite castable.
    6.Silicon carbide castable.
    7.Zirconia Refractory Castable.
    8.Lightweight insulation Refractory castable
    Features and Advantages of refractory castable:
    1. High refractoriness, High refractoriness under load.
    2. High density, low porosity.
    3. Good slag resistance and corrosion resistance.
    4. High strength and wear resistance.
    5. Good resistance to flake performance.
    6. Good thermal shock stability.
    7. Scouring resistance
    8. Good hot strength.

    Products
    Tel
    about
    contact
    亚洲五月六月丁香缴情
  • <blockquote id="augau"></blockquote>